I. Core Product Positioning
The ultimate industrial repair tape certified for nuclear applications, delivering:
✔ TLV 9027/01-06 compliance (<1000ppm halogens/sulfur)
✔ 52N/cm adhesion on rough surfaces
✔ Waterproof sealing with 55% sustainable content
II. Technical Parameters
| Parameter | Specification | Industry Value |
|---|---|---|
| Construction | PET/Rayon woven fabric | 55 mesh count for optimal flexibility |
| Coating | PE + Natural Rubber | Chemical/abrasion resistance |
| Thickness | 260μm (10.24mils) | Withstands 500+ wire brush cycles |
| Dielectric Strength | 2900V | Temporary electrical insulation |
| Temp Resistance | 110℃ for 30min | Short-term high-heat exposure |
III. Four Critical Advantages
1. Nuclear-Grade Safety
- Meets Siemens TLV 9027 for power plant maintenance
- Case: Coolant pipe temporary seals during reactor servicing
2. Extreme Surface Adaptability
- Maintains 8N/cm adhesion on rusted metal
- 90° edge retention without lifting
3. Military-Grade Protection
- IP67 waterproof (1m/72hr immersion)
- Salt spray resistant for 48hr+
4. Operator-Friendly
- Hand-tearable without tools
- Low 1.5N unwinding force
IV. Application Protocols
1. Nuclear Facility Maintenance
- Use Case: Pipe marking/equipment protection
- Procedure:
- Clean with acetone
- Apply at 50% stretch
- Double-layer for >110℃ environments
2. Industrial Cable Management
- Precautions:
- UV shield required for permanent outdoor use
- Incompatible with hydrocarbon solvents
V. Technical Q&A
❓ Q: Transformer sealing suitable?
→ Temporary use only (<72hr); pair with sealant for permanence
❓ Q: vs 3M 2929?
→ 20℃ higher temp tolerance with 40% greater thickness
Post time: May-16-2025