TESA 62510 Double-Sided PE Foam Tape: 1000μm Ultra-Strong Cushioning, Outdoor Durable Bonding Solution
I. Core Product Positioning
Designed for harsh outdoor environments, this industrial-grade foam tape meets:
- ✔ Long-term outdoor fixation of solar panel frames
- ✔ High bonding strength requirement of 10N/cm
- ✔ 1000μm thickness compensates for uneven surfaces
II. Technical Parameters
| Parameter Category | Technical Indicator | Industry Significance |
|---|---|---|
| Base Material | PE Foam (High Compression) | 180% elongation at break for curved surfaces |
| Adhesive Type | Modified Acrylic | Excellent UV resistance |
| Total Thickness | 1000μm (39.4mils) | Superior cushioning and stress dispersion |
| Long-Term Temp Resistance | 80℃ continuous use | Suitable for most global climates |
| Tensile Strength | 10N/cm | Ensures wind load resistance for solar panels |
| UV Resistance | Passes 3000h QUV test | Over 10 years of outdoor service life |
III. Four Core Advantages
1. Outdoor Durability
UV, water, and aging resistant; passes 3000h accelerated aging test
Case study: Withstands 10 years of outdoor exposure in solar power stations
2. Ultra-High Cushioning
1000μm thickness absorbs 95% of installation stress
3x better impact resistance than standard tapes
3. Surface Adaptability
180% elongation at break for irregular surfaces
70% compression rate ensures tight contact
4. Easy Application
Suitable for automated and manual installation
Strong initial tack for immediate positioning
IV. Application Guidelines
1. Solar Panel Installation
Application: Frame and bracket fixation
Key Steps: Clean surface of oil and dust
Apply 50% compression force for full contact
Reach full strength after 24h
2. Outdoor Trim Fixation
Risk Mitigation: Avoid installation below 5℃
Regular inspection required for oil-exposed areas
V. Technical Q&A
❓ Q: Suitable for high-salt coastal environments?
→ Passes 1000h salt spray test; ideal for coastal regions
❓ Q: Advantages over 3M VHB?
→ tesa 62510 is 20% thicker with 30% better UV resistance